A door that's jumped its track can jam mid-cycle or hang at a dangerous angle. We realign or replace the damaged track section and check what knocked it loose in the first place.
Fixing the symptom without finding the cause usually means the same problem returns within weeks.
Track sections are realigned to true plumb and level, verified with the same tools a new installation would use.
A bent section weakens over time even after straightening, so replacement is usually the more durable fix.
Vehicle impacts often bend both the track and the bracket mounting it to the frame. We check both.
Whatever brought you here, one of these service lines is the fix, and one call gets a technician moving.
Track sections are checked for plumb and level, then adjusted and secured to the frame at the correct tolerance.
Visibly bent or dented track sections get swapped for new standard sections rather than bent back into shape.
A roller jumping the track repeatedly usually means the rollers themselves need replacing along with the fix.
Collision damage often affects more than the visible dent. We check the full track and frame mounting system.
A track can only stay aligned if the brackets holding it are solid. We check and correct this on every off-track call.
Describing the symptom helps us bring the right track sections and hardware on the first trip.
Most off-track calls don't require a parts run thanks to a well-stocked van.
A full inspection prevents a quick patch that fails again within weeks.
Track realigned or replaced, verified plumb, and tested through a full cycle before we leave.
“Roller kept jumping the track every few days until they found the real cause, a bent bracket.”
“Track was off plumb by more than it looked. Fixed properly instead of a quick patch.”
“Storm debris jammed the track and bent it. Same-day repair got the door working again before dinner.”
Usually a worn roller, a bent track section, a loose bracket, or an impact from a vehicle or debris.
We don't recommend it. Forcing a door back on the track can cause further damage or personal injury.
Minor bends can sometimes be straightened, but visibly dented or kinked sections are usually replaced for a more durable fix.
A straightforward realignment costs less than a section replacement, and we'll confirm which applies before starting.
No, we recommend not operating the door until it's repaired, since further damage or injury risk increases with continued use.
Most off-track repairs are completed same-day, typically within one to two hours on-site.
Same-day dispatch, upfront pricing, and a written warranty on every visit.
☎ Call +1-831-293-1591From one side of Mesilla to the other, dispatch is built to reach you quickly.
Embedded Map Placeholder for Mesilla, NM